Maintenance

Two-step kit for cleaning and maintenance of pickled teak.
Base STEP 1
Anti-drip, water-based, odorless and environmentally friendly impregnation.

Use

• • Sand the surface following the natural grain of the wood with a special abrasive soap and remove excess dust;
• • Mix the product well and apply using a brush with synthetic bristles;
• • Wait at least 4 hours before completing the recovery treatment with STEP 2, FINISH.
  
  Finish STEP 2
  Coloured finish for water-based wood, odorless and with low environmental impact. Also suitable for surface protection from weathering and UV rays.
  
  Use
  
  • • Sanding with a special abrasive soap very lightly and following the grain of the wood, so as to obtain a slight shade of the color achieved with the previous impregnated (STEP 1), taking care to eliminate excess dust;
  • • Mix the product well and apply using a brush with synthetic bristles;
    
    Drying
    Allow to dry in depth for 24 hours.